101
3 Producing with the knitting machine
3.5 Eliminating errors in the fabric
1. If threads are broken, thread them up again.
2. Call up "Machine start" window.
3. Call up the "Picking up after pressing off" function. Tap the "P.aft. press-
off M1 from row" key for this purpose.
4. Tap the input fields. Enter values and confirm inputs.
5. Start the machine with the engaging rod.
6. When the set number of knitting rows has been processed, the machine
stops automatically.
The "Place fabric in fabric take-down" message appears.
7. When the fabric is long enough to be placed in the main take-down,
open the main take-down, place the fabric in the main take-down and
close main take-down.
8. If the fabric cannot yet be placed in the main take-down, repeat points
2 through 8.
9. Start the machine with the engaging rod. The knitting program is started
automatically.
Further information:
Threading up yarn [-> 69]
IMPORTANT
If you notice defective needles while picking up after
pressing off:
➜ Stop picking up after pressing off and replace the
defective needles.
To Next Page
Loading...
