163
4 Adjusting knitting machine
4.2 Advanced adjustments
Load knitting program and
determine racking reference
data
1. Load the knitting program.
2. Call up the "Machine start" window.
3. Tap on the key "SP from line 1".
4. Start the machine with the engaging rod.
The carriage assembly moves slowly and stops in the right
reversing position.
5. Wait until the "Racking finished" Message appears on the touch screen.
6. To switch on the needle selection, tap the needle selection "On" key in
the "Machine start" window.
The reference run is complete, the machine is ready to knit.
Further information:
Loading files, libraries and pattern folders [-> 62]
To Next Page
Loading...
