191
4 Adjusting knitting machine
4.3 Working with files
Automatic calling of virtual
keyboard
The virtual keyboard is automatically activated when various function keys
are selected. Either a number block appears for inputting numbers or an
alphanumeric keyboard appears for entering letters and numbers.
The virtual keyboard contains three switchover keys:
SHIFT key
CPS LCK key
CTRL key
To use a switchover key, e.g. to enter a special character, first press the
switchover key and then the key with the special character. To return to
normal characters, press the switchover key again.
Key Function
Switch on virtual keyboard
Switch off virtual keyboard
SHIFT key: switch over between uppercase and lowercase letters
and between numbers and special characters
CPS LCK key: switch over between uppercase and lowercase
letters; the setting of numbers or special characters is maintained
CTRL key: switch over to function keys F1 to F10 and keyboard
codes (short cuts)
Switchover keys
To Next Page
Loading...
