229
4 Adjusting knitting machine
4.6 Defining user profile
Change password From time to time you should change the password to be sure that it has not
become known. Carry out this activity on all knitting machines.
If the knitting machine is connected with the STOLL pattern workstation, the
password can be changed simultaneously on all the knitting machines with
the help of on-line connection (see section "On-line commands" at the end
of this chapter).
Modify password:
1. Call up the "Service" window.
2. Call up "User profile" window.
3. Enter and confirm the password with the keyboard.
4. Call up "Additional function keys"
5. Tap the "Change password" key.
"Change password" window
6. Type in the new password in the top line.
7. Type in the new password again in the bottom line.
8. Confirm the password.
9. Call up "Main menu".
Key Function
Call up the "Service" window
Call up "User profile" window
Confirm password
Call up "Additional function keys"
"Change password"
Call up "Main menu"
Keys for "Change password"
To Next Page
Loading...
