269
5 Setup Data
5.5 Setup1 - Editing the setup file
Working with the setup data
editor
Set/deactivate write protection:
✔ The Setup data editor window is open.
1. Call up "Additional function keys".
2. Tap the "Activate write protection" key in order to activate the write
protection.
- or -
➜ Tap the "Deactivate write protection" key in order to deactivate the write
protection.
Editing the setup file:
1. Tap the tab to be edited.
2. Select the desired field.
3. Overwrite the value.
4. Confirm input.
5. Repeat steps 1 or 2 to 4 for further inputs.
- or -
➜ Call up "Main menu".
To Next Page
Loading...
