363
7 Repairing the knitting machine
7.7 Entering the data of the needle selection displacement manually
6. Enter the values of the machine data sheet in the "Needle bed
parameters 2" window.
7. Confirm entries.
8. Return to the "Needle bed parameters" window.
9. Advance till the Main menu appears.
10. Save the change in the machine adjustments on the USB memory stick.
Further information:
Saving all machine data on the USB-Memory-Stick [-> 381]
IMPORTANT
If you enter wrong values it will lead to a faulty selection of the
needles.
To Next Page
Loading...
