Stoll CMS ADF-3 - Page 362

Repairing the knitting machine 7
Entering the data of the needle selection displacement manually 7.7
362
✔ The machine is switched off.
1. To switch on the machine, set the main switch to 1.
 The "BootOkc" window is displayed on the touch screen.

"BootOkc" window
2. Touch the "Restart and Machine Configuration" key.
3. Tap repeatedly on the "Continue on to the next window" key until the
"Machine parameters" window is displayed. ("Language" -> "Machine
configuration" -> "Machine configuration 2" -> "Machine options" ->
"Machine parameters" -> "Needle bed parameters")
4. In the "Needle bed parameters" window tap on the "Additional function
keys" key.
5. Open the "Needle bed parameters 2" window.