102 TimeProvider 2300/2700 User’s Guide 098-00564-000 Revision A3 – July, 2013
Chapter 3
TimeProvider 2300/2700 CLI Command Set
Command Syntax:
To enter a license key for new features:
set license add
The TP 2300/2700 will prompt for the license key and the user needs to enter the
40-character key string.
To remove an installed feature license:
set license delete
The TP 2300/2700 will respond with all installed features that can be deleted. The
user chooses from the list for the feature to delete
Example 1:
To add a feature with a license key value of
“ABCDEFGHIJ1234567890KLMNOPQRST0987654321”:
TP2700> set license add
The TP 2300/2700 will prompt for the license key:
License key: ABCDEFGHIJ1234567890KLMNOPQRST0987654321
Example 2:
To delete the PTP_INPUT license:
TP2700> set license delete
The TP 2300/2700 will prompt the user with a list of features that can be deleted.
Note: When a feature license is deleted, the feature will still function
until the next reboot.
Reinstalling the license key with the “set license add” command will
enable the feature again.
Note: Feature licenses require a valid key. The key shown in
this example is intended to illustrate the concept.
To Next Page
Loading...
Need help?
General