Symmetricom TimeProvider 2700 User Manual

098-00564-000 Revision A3 – July, 2013 TimeProvider 2300/2700 User’s Guide 37
Chapter 1 Overview
Alarms
Figure 1-19. Web Interface
Alarms
The TP 2300/2700 uses alarms to notify you when certain conditions are
deteriorating below specified levels or when issues arise like loss of power or loss of
connectivity. These alarms are indicated by status LEDs and by SNMP traps. You
can provision the alarm to either be enabled or disabled and the current alarm state
can be obtained via the communication ports. For more information, see
Provisioning Alarms, on page 227 and Appendix A, System Messages.

Symmetricom TimeProvider 2700 Specifications

General

Brand	Symmetricom
Model	TimeProvider 2700
Category	Network Hardware
Language	English