100 TimeProvider 2300/2700 User’s Guide 098-00564-000 Revision A3 – July, 2013
Chapter 3
TimeProvider 2300/2700 CLI Command Set
show led
This command displays the LED status for each LED on the front panel. See Table
2-8 for LED descriptions.
Command Syntax:
show led
Example 1:
TP2700> show led
Response 1:
------------------------------
|LED ID |LED Status |
|------------|---------------|
|power |green |
|............|...............|
|powerA |green |
|............|...............|
|powerB |off |
|............|...............|
|gnss |red |
|............|...............|
|alarm |amber |
|............|...............|
|Clock |green |
------------------------------
Level : User, Config, and Admin