Symmetricom TimeProvider 2700 User Manual

098-00564-000 Revision A3 – July, 2013 TimeProvider 2300/2700 User’s Guide 85
Chapter 3
TimeProvider 2300/2700 CLI Command Set
show hardware-status
This command displays the status of the specified hardware.
Command Syntax:
show hardware-status
Example:
TP2700> show hardware-status
Response:
-48V-A : ok (DC only)
-48V-B : ok (DC only)
+1.2V : 1.211V
+3.3V : 1.830V
+2.5V : 2.513V
+5.0V : 5.016V
-5.0V : -5V
+1.5V : 1.5V
GPS Power : 5.042V
GPS Current : 37mA
GPS Antenna : ok
FPGA : ok
Temperature : 53.0000 C
Level : User, Config, and Admin

Symmetricom TimeProvider 2700 Specifications

General

Brand	Symmetricom
Model	TimeProvider 2700
Category	Network Hardware
Language	English