Symmetricom TimeProvider 2700 User Manual

098-00564-000 Revision A3 – July, 2013 TimeProvider 2300/2700 User’s Guide 169
Chapter 3
TimeProvider 2300/2700 CLI Command Set
test
Use this command to generate event/alarm test messages. Test messages can be
generated for an individual event/alarm number or for all events/alarms.
Command Syntax:
test alarm-event {all | [1 to 170]}

Symmetricom TimeProvider 2700 Specifications

General

Brand	Symmetricom
Model	TimeProvider 2700
Category	Network Hardware
Language	English