Symmetricom TimeProvider 2700 User Manual

098-00564-000 Revision A3 – July, 2013 TimeProvider 2300/2700 User’s Guide 161
Chapter 3
TimeProvider 2300/2700 CLI Command Set
show ssm-option
Use this command to display whether the E1 or T1 sync network option is selected,
as defined in G.781, for the ETH1 and ETH2 SyncE ports.
Command Syntax:
show ssm-option
Example:
tp2700> show ssm-option
Response:
------------------------------
|Ethernet port|SSM Option |
|-------------|--------------|
|eth1 |ITU option I |
|.............|..............|
|eth2 |ITU option I |
------------------------------
set ssm-option
Use this command to select either E1 or T1 sync network options as defined in
G.781 and used for SyncE.
Command Syntax:
set ssm-option all {option1 | option2}
Example:
To set the ssm-option for ETH1 and ETH2 ports to option1:
tp2700> set ssm-option all option1
Note: The ssm-option only applies to syncE and the ITU-G.8265.1
profile of PTP.

Symmetricom TimeProvider 2700 Specifications

General

Brand	Symmetricom
Model	TimeProvider 2700
Category	Network Hardware
Language	English