Symmetricom TimeProvider 2700 User Manual

312 TimeProvider 2300/2700 User’s Guide 098-00564-000 Revision A3 – July, 2013
Appendix B Specifications and Factory Defaults
Factory Defaults
Factory Defaults
TP 2300/2700 Defaults
Table B-29. General and Communication Parameters
Description Default Value Value Range
Telnet Firewall Block Allow | Block
ICMP Firewall Allow Allow | Block
SSH Firewall Allow Allow | Block
SNMP Firewall Block Allow | Block
FTP Firewall Block Allow | Block
HTTP Firewall Block Allow | Block
User #1 Name admin 20 ASCII Characters
User #1 Password symmadmin** 32 ASCII Characters, a Minimum of 8
User #1 Access level admin user | config |admin
EIA-232 Port 57.6k-8-N-1 fixed
MGMT IP Mode Static DHCP | Static
MGMT IP State Enable Enable | Disable
MGMT IP Address 192.168.0.100 Valid IPv4 Address
MGMT Gateway Address 0.0.0.0 Valid IPv4 Address, where value of
0.0.0.0 is used for no gateway
MGMT Network Mask 255.255.255.0 Valid IPv4 Mask
Hostname Timeprovider 20 ASCII Characters
Image None 1, 2
Asset Number None 20 ASCII Characters
SNMP Manager (Up to 3) None Address: Valid IPv4 Address
Engine ID: Max of 32 ASCII Characters

Symmetricom TimeProvider 2700 Specifications

General

Brand	Symmetricom
Model	TimeProvider 2700
Category	Network Hardware
Language	English