098-00564-000 Revision A3 – July, 2013 TimeProvider 2300/2700 User’s Guide 313
Appendix B Specifications and Factory Defaults
Factory Defaults
SNMP User (Up to 10) None Username: Max of 20 ASCII Characters
Security Level: noauth, auth, priv
Auth Type: MD5, SHA
Auth Key: Max of 32 ASCII Characters,
Min of 8 ASCII Characters
Privacy Protocol: DES, AES
Privacy Key : Max of 32 ASCII
Characters, Minimum of 8
SNMP Trap User (Up to 3) None Username: Max of 20 ASCII Characters
Security Level: noauth, auth, private
Auth Type: MD5, SHA
Auth Key: Max of 32 ASCII Characters
Min of 8 ASCII Characters
Privacy Protocol: DES, AES
Privacy Key : Max of 32 ASCII
Characters, Minimum of 8
SNMP v2 Community (Up to
10)
None Name: Max of 20 ASCII Characters
Access: read-only | read-write
SNMP Trap Version 2 2, 3
SNMP v2 State Enable Enable | Disable
UTC to TAI offset 35 20 to 255
Remote Syslog Host 0.0.0.0 Valid IPv4 Address
Remote Syslog State Disable Enable | Disable
Local Alarm Log Buffer Size 100 0 to 100 Kbytes
Local Event Log Buffer Size 100 0 to 100 Kbytes
Local Command Log Buffer
Size
100 0 to 100 Kbytes
Local Security Log Buffer
Size
100 0 to 100 Kbytes
Auto-Sync Enable Enable | Disable
Bridging Time 300 100 to 100000
Table B-29. General and Communication Parameters (Continued)
Description Default Value Value Range
To Next Page
Loading...
Need help?
General