098-00564-000 Revision A3 – July, 2013 TimeProvider 2300/2700 User’s Guide 321
Appendix B Specifications and Factory Defaults
Factory Defaults
E1 Output Port Zero
Suppression
Disable Enable | Disable
T1 Output Port Frame Type ESF D4 | ESF | freq1544khz
T1 Output Port SSM State Enable Enable | Disable
Output Generation - Warm-up Squelch Squelch | On | AIS
Output Generation - Free-run Squelch Squelch | On | AIS
Output Generation - Holdover On Squelch | On | AIS
Output Generation - Fast-track On Squelch | On | AIS
Table B-43. T1/E1 Input / Output Parameters
Description Default Value Value Range
T1/E1 IO Port Input Input | Output
Table B-44. 10MHz/1PPS Output Port Parameters
Description Default Value Value range
Output Port State Enable Enable | Disable
Signal Type 10M 10M | PPS
PPS Offset 0 -1000000 to 1000000
Table B-42. T1/E1 Output Port Parameters (Continued)
Description Default Value Value Range