Symmetricom TimeProvider 2700 User Manual

098-00564-000 Revision A3 – July, 2013 TimeProvider 2300/2700 User’s Guide 201
Chapter 4 Provisioning
Provisioning the Input Reference
98 10
7CFF 0xD 100 11
10FF 0xA 102 52 12
0xB 104 58 13
22FF 0xC 106 14
40FF 0xE 108 15
0xF
invalid_SSM
30FF
invalid SSM
0xF
invalid_SSM
110 248 16
Table 4-3. Time and Frequency References - Default Priorities and PQL Values
Reference
Type
Input Port
Priority
(Default)
PQL
(Default)
Time GNSS Port 1 1
Time ETH1 Port - PTP 2 3
Frequency GNSS Port 1 1
Frequency ETH1 Port - PTP 2 3
Frequency ETH1 Port - SyncE 4 3
Frequency T1 / E1 3 3
Table 4-4. PQL Values for Clock States
CLOCK STATE Rb OCXO
Warmup 16 16
Freerun 4 6
Fast 4 6
Normal Freq PQL for
Selected Ref.
Freq PQL for
Selected Ref.
Table 4-2. PQL for Frequency References - Converted from SSM or clockClass (Continued)
Input SSM
Option 1
E1 and SyncE
Input SSM
Option 2
T1
Input SSM
Option 2
SyncE
Input PTP
clockClass
G.8265.1
Input PTP
clockClass
Tele2008/Default
To
Input
PQL

Symmetricom TimeProvider 2700 Specifications

General

Brand	Symmetricom
Model	TimeProvider 2700
Category	Network Hardware
Language	English