Symmetricom TimeProvider 2700 User Manual

116 TimeProvider 2300/2700 User’s Guide 098-00564-000 Revision A3 – July, 2013
Chapter 3
TimeProvider 2300/2700 CLI Command Set
password
Use this command to modify the password of the current user.
Command Syntax:
password
Example:
TP2700> password
Response:
For new user password, only chars {a-z, A-Z, 0-9, ! ( ) - _ .
? ~ *} are accepted
Password:
Prompt for password confirmation
Level : User, Config, and Admin
Note: Be sure to not lose or forget the password. Contact
Symmetricom support for the password recovery procedure if all
admin-level user passwords are lost.

Symmetricom TimeProvider 2700 Specifications

General

Brand	Symmetricom
Model	TimeProvider 2700
Category	Network Hardware
Language	English