Name: Symmetricom TimeProvider 2700
Brand: Symmetricom
Rating: 4 (1 reviews)

To Next Page

To Previous Page

098-00564-000 Revision A3 – July, 2013 TimeProvider 2300/2700 User’s Guide 99

Chapter 3

TimeProvider 2300/2700 CLI Command Set

To set the IPv4 address for the Ethernet management packet service port ETH1 to

192.168.2.11, the mask to 255.255.255.0, and the gateway 0.0.0.0:

tp2700> set ip ip-address eth1 ipv4 address 192.168.2.11 netmask

255.255.255.0

gateway 0.0.0.0

tp2700> set ip state eth1 ipv4 restart

Level : Config and Admin

Note: PTP will be restarted after the IPv4 interface is restarted for the

packet service ports ETH1 or ETH2.

Questions and Answers:

Need help?

Do you have a question about the Symmetricom TimeProvider 2700 and is the answer not in the manual?

Symmetricom TimeProvider 2700 Specifications

General