Symmetricom TimeProvider 2700 User Manual

098-00564-000 Revision A3 – July, 2013 TimeProvider 2300/2700 User’s Guide 105
Chapter 3
TimeProvider 2300/2700 CLI Command Set
To display the last 10 entries of the alarm-event log (10 lines from the tail of current
log):
TP2700> show log alarm-event tail 10
Response 2:
2012-12-29 00:00:10 TIMEPROVIDER alarmid: 006,000,EVENT,
time Entered bridging state
2012-12-29 00:00:34 TIMEPROVIDER alarmid: 006,000,EVENT,
freq Entered bridging state
2012-12-29 00:22:06 TIMEPROVIDER alarmid: 010,000,EVENT,
GNSS input time qualified
2012-12-29 00:22:06 TIMEPROVIDER alarmid: 010,000,EVENT,
GNSS input freq qualified
. . . . . .
Level : User, Config, and Admin

Symmetricom TimeProvider 2700 Specifications

General

Brand	Symmetricom
Model	TimeProvider 2700
Category	Network Hardware
Language	English