Symmetricom TimeProvider 2700 User Manual

158 TimeProvider 2300/2700 User’s Guide 098-00564-000 Revision A3 – July, 2013
Chapter 3
TimeProvider 2300/2700 CLI Command Set
--------------------------------------------------------------------------
|Index|User Name |User Type |Auth. Key |Priv. Key |
|-----|--------------------|-------------|---------------|---------------|
|1 |test |snmpnoauth |********** |********** |
|.....|....................|.............|...............|...............|
|2 |harsha |snmpshades |********** |********** |
--------------------------------------------------------------------------
Example 3:
TP2700> show snmp trapuser
Response 3:
No SNMP trap user configured.
Example 4:
TP2700> show snmp v2-community
Response 4:
-----------------------------------------
|Index|Community Name |Access Level|
|-----|--------------------|------------|
|1 |test |readwrite |
|.....|....................|............|
|2 |testteam |readwrite |
-----------------------------------------
Example 5:
TP2700> show snmp state-v2
Response 5:
SNMP v2 state : enable
Example 6:
TP2700> show snmp trapversion
Response 6:
Trap version - v3
Level : User, Config, and Admin

Symmetricom TimeProvider 2700 Specifications

General

Brand	Symmetricom
Model	TimeProvider 2700
Category	Network Hardware
Language	English