VS1 Installation, Configuration & Operating Guide 3
HARDWARE OVERVIEW
This section of the ICO Guide describes the following hardware components of the VS1 Telephone
System.
• Telecor Voice Server Model 200 (PV-CSU-200)
• Port Expansion Unit Model 250 (PV-PEU-250)
• Port Expansion Unit Model 205 (PV-PEU-205)
• Port Expansion Unit Model 200 (PV-PEU-200)
• Dry Contact Unit Model 100 (PV-DCU-100)
• Cut-Over Box (PV-HWC-P10)
• 32-Port Host Adapter Card (PV-HA2-032)
• 64-Port Host Adapter Card (PV-HA2-064)
• Caller ID Option Module (PV-HWC-C10)
• 10Base-T Network Interface Card (PV-HWC-E10)
• T1 Interface Card (PV-HWC-T10)
• TVS VGA Video Card (041-000-0013)
• SC200 Switch Card (701-000-0044)
• Computer Telephony Interface Module (CTIM) (PV-HCT-C01)
• PC Option Module (PCOM) (PV-HCT-M01)
• ACD Status Board Option Kit (PV-HWC-A10)
To Next Page
Loading...