Telecor VS1 - Using Connect-Basic Operation; Making a Call; Disconnecting a Call; Answering a Call

178 Station Options
Using Connect—Basic Operation
Making a Call
1. In the Calls window, click the Dial button.
2. In the Dial dialog box, type the extension or phone number. If you are calling an outside
phone number you must type a 9 at the beginning of the number.
• If you are dialing an internal number you can also enter an alphanumeric message in the
Dial dialog box Message field. This message appears only on stations with a display,
such as the Display Phone Model 200 (DP200) or an Attendant or Connect CTI
application. Messages do not appear on external calls.
3. Click Dial.
Disconnecting a Call
1. In the Calls window, click the Disconnect button in the Calls list.
Answering a Call
1. In the Calls window, click the Internal Call or External Call button in the Calls list.
Redialing a Number
1. In Calls window, click the Redial button.
2. In the Redial dialog box, click to select a number from a list of earlier calls.
3. Click Redial.
Placing a Call On Hold
1. In the Calls window, click the Call button in the Calls list. The connected call graphic
changes to an hourglass.
Or
2. Click the Hold button.