182 Station Options
Answering a Call
1. Lift the handset.
• Press the A Feature button to display Caller ID information.
Answering Multiple Calls
If you are using LINE 1 when another call comes in, a two-beep call waiting tone sounds (presuming
Call Waiting is enabled).
1. Press the LINE 2 button one time to preview the call. Press the LINE 2 button a second time to
answer the call and place the first call on hold.
Transferring a Call
After answering the call:
1. Press the TRANSFER Feature button and listen for the tone.
2. Dial the extension to which you want to transfer the call. Hang up to transfer.
Placing a Call on Hold
1. Press the HOLD Feature button once to place a call on hold.
Taking a Call off Hold
1. Press the flashing line button of the call on hold.
Redialing the Last Number Called
1. Press the REDIAL Feature button.
Changing the Number of Lines Available
1. Lift the handset and press 7801.
2. During the Feature Programmer announcement, press 677.
• Do not wait for the announcement to end before pressing 677.
3. Press 2 for a two-line phone; 3 for a three-line phone; 4 for a four-line phone; 5 for a five-line
phone. Hang up.
To use the additional lines, press the appropriate Line Appearance button prior to dialing.
For more detailed information on the use and installation of the DP200 Display Phone, please refer
to the Telecor Display Phone Model 200 (DP200) User’s Guide.
To Next Page
Loading...