118 VS1 Editor Configuration Application
Running a Command Script from the TVS Command Prompt
1. To run a Command Script from the TVS Command prompt use the format: @{file} (with
{file} representing the Command Script Name/Number).
2. Press ENTER.
Running a Command Script from a Phone
1. Lift the handset, and dial 71 and the two-digit Command Script Number that you set up to run a
command.
• For example: dial 7101 to run the f1.cmd; dial 7102 to run the f2.cmd; dial 7199 to run
the f99.cmd.
Note You can customize a Feature button on the Display Phone Model 200 (DP200) to run a
Command Script. Lift the handset and dial 7801, and then press 2 to customize a Feature
button. Dial 32 for the Command Script code number, and then dial the two digit
Command Script that you set up to run.
Running a Command Script from an Auto Attendant
Running Command Scripts from an Auto Attendant provides customers the flexibility of being in
control of how their system operates even when they are not on-site. Following the steps below
ensures that authorized personnel have the option of calling in to the VS1 phone system and dialing
the Command Script Number when the Auto Attendant answers.
1. Click Auto Attendants in the Tree Control display.
• The Auto Attendant pane appears.
2. From the Select Auto Attendant drop-down box, select the Auto Attendant to run the
Command Script.
3. Select the Main procedure, and then click Edit.
4. In the Phone System / Caller Interaction list box, select Caller Response Handlers and click
New.
• The Specify Systems Actions for Caller Responses dialog box appears.
5. Select Caller Responses and click New.
6. In the New Caller Action dialog box, select Multi-digit Number.
7. In the Specify Multi-digit Number window, type 71{nn} (with nn representing the Command
Script number) in the Number text box and click OK.
• Placing 71 prior to the Command Script number ensures that the code to run the Command
Script is the same externally as it is internally (running Command Script from system
Phone). Up to 10 digits can be entered in the Number box; however, the code to run the
Command Script externally will then be different from running the Command Script
internally.
To Next Page
Loading...