66 Tel-Site System Management Application
• Download files from a site
• Change site configurations
• Assign an RSA (Remote System Access) password
• Upload files to a site
• Reload configuration changes
TVS Modem as an Extension Connection Checklist
In the System Configuration 2 pane of the VS1 Editor program, set the modem to
answer on the first ring.
In each configuration, make sure that PEU Port 16 is configured as a Modem/Fax port
with the extension 599.
Using your current connection method, upload the new configuration settings (only if
changed from default) to the customer TVS and reload the changes.
Connect a standard telephone cord between the line jack of the TVS modem and PEU
Port 16, which is configured by default as a Modem/Fax port.
In the Connection dialog box of the Site Selection window, enter an RSA password if
required.
Enter a phone number of the CO line plugged into the line jack of the TVS modem.
If an Auto Attendant will answer the Tel-Site call, enter five or six commas after the
phone number and then the extension number 599.
Ensure The modem shares a CO line check box is cleared.
To Next Page
Loading...