Telecor VS1 - Creating a New Toll Restriction Scheme

To Next Page

To Previous Page

VS1 Installation, Configuration & Operating Guide 163

Therefore, if the dial string consists of 1403, all calls beginning with 1403 are denied. If the dial

string consists of 14037, only numbers beginning with 14037 are denied and all other 1403 calls

are allowed.

Note The wildcard x can be used to represent a single digit, matching any number 0-9 in dial

string. The Toll Restriction Scheme sorts dial strings in numerical order 0 through 9, and

then the wildcard x.

Note If a number is dialed that does not match anything in the Toll Restriction Scheme, the call

is allowed.

6. Click the Save button in the toolbar.

7. Repeat step 4-6 for other denied entries.

Creating a New Toll Restriction Scheme

To create a Toll Restriction Scheme, complete the following steps:

1. Select Toll Restriction in the Tree Control Display.

• The Toll Restriction pane appears.

2. To add a new Scheme, click New.

• The Scheme is added in the Scheme Name list box above and is numbered accordingly.

3. Select the new Scheme and type a name for it.

4. Click New Deny.

• An empty dial string box marked with a red X appears in the Allow/Deny Number Entry

list box.

5. Enter the dial string that will be denied. The VS1 System performs a “Best Match” type of

comparison between the dial string and the contents of the defined Toll Restriction Scheme.