VS1 Installation, Configuration & Operating Guide 201
OVERVIEW OF REFERENCE
This section provides additional information not covered in the previous sections. This information
is provided as reference, and does not describe in detail the configuration of the system or hardware,
which is found in the appropriate sections of this guide.
Included in this section are:
• Default Extensions and Access Codes
• An overview of Direct Inward Station Access (DISA) and use
• An overview of Digital Signal Processor (DSP) Volume Adjustments
• A procedure for setting the system date and time from a phone station
• Flow Charts of system processes for handling calls, transfers, ACDs and Auto Attendants
• An overview of how to interpret Line Status symbols when the ls command is issued
• A reference to PBX commands
• Recording Voice Files
• Pre-recorded Message List and Phrase List
• A procedure for Scheduled Disk Optimization
• An overview of Station Message Detail Recording (SMDR) and how to interpret the data
• An overview of the VS Call Accounting application to view SMDR data.
• A procedure for Verifying CO Disconnect Signals
• Setting up a T1 Interface Card
• A glossary of common telephony and computer telephony features and terms, and how they
relate to the VS1 telephone system
To Next Page
Loading...