VS1 Installation, Configuration & Operating Guide 13
10Base-T Network Interface Card
Installing a 10Base-T Network Interface Card enables Station Message Detail Recording (SMDR)
data to be written a network server. The 10Base-T Network Interface Card must be installed in the
Telecor Voice Server (TVS) if you want to log on to a Novell
®
network or an NT 4.0 server running
File and Print Services for Netware (FPNW).
10Base-T Network
Interface Card
Hardware Specifications
Dimensions: 6.25" x 2.75"
Weight: 3.5 oz.
Power Requirement: + 5 Vdc from ISA Bus
Adapter Specifications: RJ-45 connector
Architecture: 16- Bit Industry Standard Architecture (ISA) bus
Standards Compliance: FCC Part 15 Class A
Compatibility: Novell® NE2000
To Next Page
Loading...