TOMATECH TAC-100XT User Manual

TOMATECH AUTOMATION
� Set/search G54～G59 coordinate system and zero offset value
in workpiece coordinate system page;
� Set/search use information of current tool life
Enter alarm interface including alarm information, alarm log page
� Search CNC alarm, CNC warning, PLC alarm, PLC warning in
alarm information page;
� Display alarm/warning history record in alarm log page
Enter Setting interface including CNC setting, system clock, file
management page
� Set switch, level and parameters in CNC setting page;
� Set system clock, data in system clock page;
� Search/management files in CNC/U disk, copy/resume files in
file management page
Enter Parameter interface including state parameters, data
parameter, often used parameters and pitch compensation page.
� Search/set state parameters in the state parameter page;
� Search/set data parameters in the data parameter page;
� Search/set user’s customized parameters in the often used
parameter page;
� Search/set pitch error compensation data of each axis in the
pitch compensation page.
Enter Diagnosis interface including the system diagnosis, system
information page
� Search the current diagnosis information of the CNC in the
diagnosis page.
� Search the product information, ladder information and ladder
state.
PLC page includes three subpages: PLC state, PLC monitor, PLC
data.
� PLC state page can search states of X, Y, F, G, R, A, C,T;
� PLC monitor page can monitors the execution state of current
ladder on-line;
� PLC data page can search/set K, D, DT, DC value.
1.1.4 Machine panel
The key functions on MST-2000 machine panel are defined by PLC program (ladder), the
detailed function meanings are referred to machine manufacturer manual.
The functions of this MST-2000 machine panel keys defined by standard PLC program
are as follows:

TOMATECH TAC-100XT Specifications

General

Brand	TOMATECH
Model	TAC-100XT
Category	Control Systems
Language	English