TOMATECH TAC-100XT User Manual

TOMATECH AUTOMATION
Ｎ０２００ T0303；
Change for the No.3 tool and execute its
offset
Ｎ０２１０ G0 Z-56 X42； Approach to the part
Ｎ０２２０ G1 X30 F100； Cut the Φ30 groove
Ｎ０２３０ G1 X37 F300； Return
Ｎ０２４０ G1 X40 W1.5； Chamfering
Ｎ０２５０ G0 X42 W30； Keep the width of the grooving
Ｎ０２６０ G1 X40 ；
Ｎ０２６２ G1 X37 W1.5； Chamfering
Ｎ０２６４ G1 X10； Cut the Φ10 groove
Ｎ０２６６ G0 X17 Z-1；
Ｎ０２６８ G1 X16；
Ｎ０２７０ G1 X14 Z0 F200； Chamfering
Ｎ０２８０ G0 X150 Z50； Return to the tool change point
Ｎ０２９０ T0404 S100；
Changing for the No. 4 tool and set the
spindle speed for 100
Ｎ０３００ G0 X42 Z-20； Approach the part
Ｎ０３１０ G92 X39 W-34 F3； Thread-cutting cycle
Ｎ０３２０ X38； Feed 1mm for the 2nd cutting
Ｎ０３２０ X37； Feed 1mm for the 3rd cutting
Ｎ０３３０ X36.4； Feed 0.6mm for the 4th cutting
Ｎ０３３２ X36； Feed 0.4mm for the 5th cutting
Ｎ０３４０ G0 X150 Z50； Return to the tool change point
Ｎ０３５０ T0100 U0 W0；
Change for the No.1 tool and execute its
offset
Ｎ０３６０ M5； Turn off the spindle
Ｎ０３７０ M9； Turn off cooling
Ｎ０３８０ M13； Unclamp the chuck
Ｎ０３９０ M30； Program ends
Chapter 14 Machining Example
301
Ⅱ Operation
13.2 Program Input
13.2.1 View a saved program
Press to enter program interface , and press to enter the local catalog page as
follows:
In above window the names of the programs saved can be viewed for renaming the new
program.

TOMATECH TAC-100XT Specifications

General

Brand	TOMATECH
Model	TAC-100XT
Category	Control Systems
Language	English