TOMATECH AUTOMATION
［Data meaning］ Acceleration/deceleration time constant during cutting feed and manual
feed
［Data unit］ ms
［Data range］ 0～4000
0 3 0 FEDFL
［Data meaning］ The starting speed of cutting feed
［Data unit］
Setting unit Data unit
Metric machine mm/min
Inch machine 0.1inch/min
［Data range］
IS-B IS-C
Metric machine 0～8000 0～8000
Inch machine 0～3000 0～3000
0 3 1 JOGSPEED
［Data meaning］ Set speed when manual feedrate override is 100%
［Data unit］
Setting unit Data unit
Metric machine mm/min
Inch machine 0.1inch/min
［Data range］ 10～30000
0 3 2 RPDFLn
［Data type］ Word axis
［Data meaning］ The rapid traverse rate when the override is F0
［Data unit］
Setting unit Data unit
Metric machine mm/min
Inch machine 0.1inch/min
［Data range］
IS-B IS-C
400
Volume Ⅲ Connection
Metric machine 0～4000 0～4000
Inch machine 0～1500 0～1500
3.2.3 Precision compensation
0 0 3 PEC
Bit5 1: Pitch error offset active
0: Pitch error offset inactive
0 1 0 *** *** *** CPF5 CPF4 CPF3 CPF2 CPF1
CPF4~CPF1: Setting values of backlash offset pulse frequency (by BCD code)
The set frequency =(setting value+1) Kpps
CPF5 CPF4 CPF3 CPF2 CPF1 Set frequency(Kpps)
0 0 0 0 0 1
To Next Page