TOMATECH TAC-100XT User Manual

TOMATECH AUTOMATION
page. The page is shown below:
Chapter 10 Data Setting, Backup and Restore
281
Ⅱ Operation
The user can add the often used state parameter, data parameters to the often used
parameters
to get the convenient search and alteration.
1) Adding often used parameters
a) In the state parameter page, press to enter the state parameter menu. The
page is shown below:
b) Move the cursor to the required addition parameter number (taking example of No.003),
press , and the current parameter becomes the often used. The added is
automatically sorted in the last line. The page is shown below:
282
Ⅱ Operation
At the moment, pressing , , can adjust the parameter sorting
position.
Note: The addition method of data parameter is similar to that of state parameter.
2) Sorting often used parameters
Pressing , can move the parameter where the current cursor is. Pressing
sorts all often used parameter in sequence number.
3) Removing often used parameters
Move the cursor to the required parameter in the often used parameter page. Press
and the current often used parameter is removed. Press and all often used parameters are removed.
4) Altering often used parameter
Parameters can be altered directly in the often used parameter page. Its alteration
method is the same that of state parameter and data parameter. Its value is also refreshed
in the state parameter or data parameter page.
Chapter 13 Communication
283
Ⅱ Operation
CHAPTER 11 U OPERATION FUNCTION
11.1 File Management Function Introduction
TAC-100XT has the file management function to execute the file copy, data backup, data
resume, the system upgrading (2nd grade) and so on.
In any states, press to select the setting interface, press to enter the file
management page. Insert U disk and the system automatically identifies it. The system
displays the
icon at the lower right bottom of the system after it sucessfully identifies the icon as
follows:
Press the soft key (or ) to select the CNC catalog or the U disk catalog, and

TOMATECH TAC-100XT Specifications

General

Brand	TOMATECH
Model	TAC-100XT
Category	Control Systems
Language	English