TOMATECH AUTOMATION
25：GND
Chapter 2 Definition and Connection of Interface Signal
317
Ⅲ Connection
2.4.2 Connection to inverter
The analog spindle interface SVC may output 0~10V voltage, its interior signal circuit is
shown in
Fig. 2-20:
Fig. 2-20 SVC signal circuit
TAC-100XT is connected with the inverter shown in Fig. 2-21:
Fig. 2-21TAC-1002T／TAC-100XT-V is connected with the inverter
2.5TAC-1002T／TAC-100XT-V being Connected with PC
2.5.1 Communication interface definition
Fig. 2-22 CN51 communication interface (DB9-female)
2.5.2 Communication interface connection
TAC-100XT ／TAC-1002T-V can perform the communication by CN51 and PC(optional
communication software).TAC-1002T/TAC-100XT-V is connected with PC shown in Fig
2-23A:
TAC-100XT(CN51)
Metal shell
RS232 interface on PC
Metal shell
Fig. 2-23ATAC-1002T is connected with PC
Signal Explanation
RXD Receiving data
TXD Transmitting data
GND Signal grounding
6:
7:
8:
9:
1:
2: RXD
3: TXD
4:
5: GND
SVC
318
Ⅲ Connection
2.6 Power Interface Connection
TOMATECH-PB2 power box is applied inTAC-1002T system, which involves 4 groups of
To Next Page
Loading...
Need help?
General