TOMATECH AUTOMATION
Called subprogram number （ 0000 ～ 9999 ） . The leading zero of
subprogram number can be omitted when the calling times is not input; the
subprogram number must be with 4 digits when the calling times is input..
Call times: 1～9999. The calling times cannot be input when it is 1.
Executed block after returning to the main program is 0000～
9999，and its leading zero can be omitted.
Macro program call M9000～M9999
Command function: call macro programs corresponding to command values (O9000～
O9999).
Macro programs: O9000～O9999 programs are for machine manufacturer, used for
editing
subprogram with special functions, called macro programs. The system must have 2-level
operation
To Next Page