TOMATECH TAC-100XT User Manual

TOMATECH AUTOMATION
44 SP2
43 SP1
11
10
40
26
STAO
SP0
SP1
SP2
CN62
8 COIN 21 COIN
19 EN
37,38
23,35
3,16
11,17
� Orientation function wiring diagram betweenTAC-1002T and GS3000Y-N
TAC-100XT signal interface GS3000Y-N signal interface
Note 1: When the system is matched with GS3000Y-N, the single-point orientation is defaulted; up
to 4
points orientation can be realized.
Note 2: GS3000 Series signal interface CN1 adopts DB44 3-stripe male plug.
Chapter 2 Definition and Connection of Interface Signal
347
Ⅲ Connection
2.8.8 Spindle Cs axis control function
� Related signals（defined by standard PLC program）
Type Sign Interface Address Function Remark
VPO CN15.5 X5.0
Spindle speed/position control
Input state
signal
ALM5 CN15.4 X5.3
Alarm signal of the 5th drive
unit
It is valid when
0V is input
VP CN15.20 Y5.0
Spindle speed/position control
switch output
TAP CN15.21 Y5.1
The 2nd gain selection signal
of the spindle speed(used to

TOMATECH TAC-100XT Specifications

General

Brand	TOMATECH
Model	TAC-100XT
Category	Control Systems
Language	English