TOMATECH AUTOMATION
INPUT
CN61
OUTPUT
CN62
AXIS Y
CN13
AXIS Z
CN12
AXIS X
COM PORT
CN11
CN14
AXIS 4
CN21
ENCODER
MPG
CN51
+24V -12V +12V
CN31
+5V +5V
0V 0V 0V +5V
CN1
Fig.1-2 TOMATECH 980TDc-V rear cover interface layout
308
Ⅲ Connection
1.1.2 Interface explanation
� Power box: TOMATECH-PB2, for +5V, +24V, +12V, -12V, GND power supply
� Filter(optional): Input terminals for 220V AC power, PE terminal for grounding, output
terminals to L, N terminals of TOMATECH-PB2 power box
� CN1: power supply interface
� CN11: X axis，pin15 D female, connect with X drive unit
� CN12: Y axis，pin15 D female, connect with Y drive unit
� CN13: Z axis，pin15 D female, connect with Z drive unit
� CN14: 4th axis，pin15 D female, connect with 4th drive unit
� CN15: spindle, pin 25 D female, connect with spindle drive unit
� CN21: encoder, pin15 D male, connect with spindle encoder
� CN31: MPG, pin26 D male, connect with MPG
� CN51: communication, pin9 D female, connect PC RS232 interface
� CN61: input, pin44 D male, connect with machine input
� CN62: output, pin44 D female, connect with machine output
1.2TAC-1002T Installation
1.2.1TAC-1002T external dimensions
To Next Page
Loading...
Need help?
General