TOMATECH TAC-100XT User Manual

TOMATECH AUTOMATION
“U:\TAC-1002T_backup\serial
288
Ⅱ Operation
number” remains unchanged.
For the above reason, the user should execute the operation path selection during
resuming
data:
Default path ：U:\TAC-1002T_backup\user
Serial number path：U:\TAC-1002T_backup\serial number
Example: backup/resume data of many CNC systems
When the user backups the system A (serial number CT0000001), the generated file by
data
backup is “U:\TAC-100XT_backup\CT0000001” and “U:\TAC-100XT_backup\user”; When
the user
backups the system B（ serial number CT0000002 ） , the generated file by data backup
is
“U:\TAC-100XT_backup\CT0000002”. The “U:\TAC-100XT_backup\user” generated by A
is replaced
automatically by the same name of the system B. At the moment, the user can execute
the operation
path selection when it executes the data resume operation of the system A:
1) When the previous data of the system A is resumed, the operation path is :
“U:\TAC-100XT_backup\CT0000001”；
2) When the backup data of the system B is copied to the system A, the operation path is:
“U:\TAC-100XT_backup\CT0000002” or default path;
Press and appear the dialog box of operation path selection, and then select the
operation path by , when the cursor is in the resume column. Taking an example of
selecting the default path, the display is shown below:
11.3.4 Format of data backup/resume file
File Extensio
n name
Content
Parameter file PARAM .PAR State parameters, data
parameters
Tool compensation
data TOFF .CMP Tool offset, tool wear
Pitch compensation WOFF .WMP Pitch compensation
Chapter 13 Communication
289
Ⅱ Operation
Alarm log Alarm.his .his Alarm log
PLC program No

TOMATECH TAC-100XT Specifications

General

Brand	TOMATECH
Model	TAC-100XT
Category	Control Systems
Language	English