TOMATECH AUTOMATION
� 2-channel 0V～10V analog voltage output, two-spindle control
� 1-channel spindle encoder feedback, spindle encoder line can be set（100p/r～5000p/r）
� Transmission ratio between encoder and spindle:（1～255）:（1～255）
� Spindle speed: it is set by S or PLC, and speed range: 0r/min～9999r/min
� Spindle override: 50%～120% 8 grades tune
� Spindle constant surface speed control
� Rigid tapping
� Tool function
Chapter 1 Programming
� Tool length compensation
� Tool nose radius compensation（C）
� Tool wear compensation
� Tool life management
� Toolsetting mode: fixed-point toolsetting, trial-cut toolsetting, reference point return
toolsetting, automatic toolsetting
� Tool offset execution mode: modifying coordinate mode, tool traverse mode
� Precision compensation
� Backlash compensation
� Memory pitch error compensation
� PLC function
� Two-level PLC program，up to 5000 steps，the 1st program refresh period 8ms
� PLC program communication download
� PLC warning and PLC alarm
� Many PLC programs（up to 16PCS）, the PLC program currently running can be
selected
� Basic I/O：41 input signals /36 output signals
� Man-machine interface
� 8.4″ wide screen LCD，resolution: 640×480
� Chinese, English, Spanish, Russian display
� Planar tool path display
� Real-time clock
� Operation management
� Operation mode: edit, auto, MDI, machine zero return, MPG/single, manual, program
zero return
� Multi-level operation privilege management
� Alarm record
� Program edit
� Program capacity: 40MB，384 programs（including subprograms and macro programs）
� Edit function: program/block word search, modification, deletion
� Program format: ISO command, statement macro command programming, relative
coordinate, absolute coordinate and compound coordinate programming
� Program call: macro program call with parameter, 4-level program built-in
� Communication function
� RS232：two-way transmitting part programs and parameters, PLC program, system
To Next Page