Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
130
String within 32 characters
The available time zone names depend on the time zone configured by the parameter
“local_time.time_zone”. For available time zone names, refer to Time Zone.
Settings->Time & Date->Location
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Time & Date->General->SNTP Settings->Location
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Basic Settings->Time & Date->SNTP Settings->Location
DST Settings
You can set DST for the desired area as required. By default, the DST is set to Automatic, so it can be
adjusted automatically from the current time zone configuration.
The time zone and corresponding DST pre-configurations exist in the AutoDST file. If the DST is set to
Automatic, the IP phone obtains the DST configuration from the AutoDST file.
You can customize the AutoDST file if required. The AutoDST file allows you to add or modify time zone
and DST settings for your area each year.
Topics
Auto DST File Attributes
Customizing Auto DST File
Auto DST File Customization
Before customizing, you need to obtain the AutoDST file. You can ask the distributor or Yealink FAE for
DST template. You can also obtain the DST template online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage.
Auto DST File Attributes
The following table lists description of each attribute in the template file:
[+/-][X]:[Y], X=0~14, Y=0~59
String (if the content is more
than one city, it is the best to
keep their daylight saving time
To Next Page
Loading...
Need help?
General
