Account Settings
233
hotdesking.startup_outbound_enable
It enables or disables the IP phone to provide input field of outbound server on the
logon wizard after startup when there is no registered account.
Note: It works only if “phone_setting.logon_wizard” is set to 1 (Enabled).
phone_setting.logon_wizard_forever_wait
It enables or disables the IP phone to remain at the hot desking logon wizard even
though timeout.
Multiple Line Keys per Account
You can assign multiple line keys to associate with a specific account. The line keys are automatically
assigned with Line type from the first unused one (unused one means the line key is configured as N/A or
the associated account is not registered). All calls on this account will be distributed evenly among these
line keys. It is useful for managing a high volume of calls to an account.
When you assign multiple line keys to be associated with an account, you can configure the IP phone
whether transferring a call or setting up a conference call on the current line key or on a new distribution
line key.
It is not applicable to T19(P) E2 IP phones.
Topics
Multiple Line Keys per Account Configuration
Auto Line Labels Rule Configuration
Default Account
Multiple Line Keys per Account Configuration
The following table lists the parameters you can use to configure multiple line keys per account.
features.auto_linekeys.enable
It enables or disables to assign multiple line keys to associate with a specific account.
To Next Page
Loading...
Need help?
General
