Yealink T40G Administrator's Guide

Troubleshooting
548
Broadsoft Call Park
Parameter
features.call_park.group_enable
<y0000000000xx>.cfg
Description
It enables or disables the IP phone to display the GPark soft key during a call.
Note: If it is set to 1 (Enabled), the Retrieve soft key will also be displayed on the
dialing screen.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Features->Pickup & Park->Group Call Park (if bw.enable =1)
Parameter
features.call_park.park_ring
<y0000000000xx>.cfg
Description
It enables or disables the IP phone to play a warning tone when a call is parked
against its line.
Note: It works only if “features.call_park.park_visual_notify_enable” is set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Features->Pickup & Park->Audio Alert for Parked Call (if bw.enable =1)
Parameter
features.call_park.park_visual_notify_enable
<y0000000000xx>.cfg
Description
It enables or disables the IP phone to display a parked indicator when a call is parked
against its line.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Features->Pickup & Park->Visual Alert for Parked Call (if bw.enable =1)
Parameter
features.call_park.group_park_code
<y0000000000xx>.cfg
Description
It configures the group call park code for the GPark soft key.
This group call park code will also apply to the call park DSS key.
Note: It works only if “features.call_park.park_mode” is set to 1 (FAC).
Permitted
Values
String within 32 characters
Default
Blank

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries