Yealink T40G

Troubleshooting
539
Broadsoft Flexible Seating
Parameter
account.X.flexible_seating.enable
[1]
<MAC>.cfg
Description
It enable or disable the flexible seating feature.
Note: For host, It works only if the values of the parameters
“account.X.hoteling.enable” and “account.X.acd.enable” are set to 0 (Disabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.hoteling.mode
[1]
<MAC>.cfg
Description
It configures the hoteling mode.
Permitted
Values
0-Disabled
1-Hoteling
2-Flexible Seating Host
3-Flexible Seating Guest
Default
0
Parameter
account.X.hoteling.pin
[1]
<MAC>.cfg
Description
It configures the flexible seating PIN.
Permitted
Values
String
Default
Blank
Parameter
features.homescreen_softkey.hoteling.enable
[2]
<y0000000000xx>.cfg
Description
It enables or disables the IP phone to display the Flexible Seating soft keys such as
GuestIn or GuestOut on the idle screen.
Note: It works only if “account.X.flexible_seating.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for
T41P/T41S/T27P/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2; for T19(P) E2, X=1.
[2]
Hoteling feature may also need to configure this parameter, refer to Broadsoft Hoteling for more information.