To Next Page

To Previous Page

Phone Provisioning

Exporting CFG Configuration Files from Phone

You can export the phone’s configuration file to local and make changes to the phone’s current feature

settings. You can apply these changes to any phone by importing the configuration files via the web user

interface.

You can export five types of CFG configuration files to local system:



<MAC>-local.cfg: It contains changes associated with non-static parameters made via phone user

interface and web user interface. It can be exported only if “static.auto_provision.custom.protect” is

set to 1 (Enabled).



<MAC>-all.cfg: It contains all changes made via phone user interface, web user interface and using

configuration files.



<MAC>-static.cfg: It contains all changes associated with static parameters (for example, network

settings) made via phone user interface, web user interface and using configuration files.



<MAC>-non-static.cfg: It contains all changes associated with non-static parameters made via

phone user interface, web user interface and using configuration files.



<MAC>-config.cfg: It contains changes associated with non-static parameters made using

configuration files. It can be exported only if “static.auto_provision.custom.protect” is set to 1

(Enabled).

Procedure

1. Navigate to Settings->Configuration.

2. In the Export or Import Configuration block, click Export to open the file download window, and

then save the file to your local system.

Phone User Interface

Phone user interface makes configurations available to users and administrators; but the

Advanced/Advanced Settings option is only available to administrators and requires an administrator

password (default: admin).

You can configure IP phones via phone user interface on a per-phone basis.

Yealink T40G Administrator's Guide

Other manuals for Yealink T40G