Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
72
centralized provisioning method:
Yealink IP phones can obtain the provisioning server address during startup. Then IP phones first
download boot files and configuration files from the provisioning server, and then resolve and update
the configurations written in configuration files. This entire process is called auto provisioning. For more
information on auto provisioning, refer to Yealink_SIP_IP_Phones_Auto_Provisioning_Guide.
The IP phones can be configured to upload log files (log files provide a history of phone events), call log
files and contact files to the provisioning server. You can also configure a directory for each of these three
files respectively.
Topics
Auto Provisioning Settings Configuration
User-Triggered Provisioning Settings Configuration
Auto Provisioning Settings Configuration
The following table lists the parameters you can use to configure settings for auto provisioning.
static.auto_provision.attempt_expired_time
It configures the timeout interval (in seconds) to transfer a file via auto provisioning.
Note: It has a higher priority than the value defined by the parameter
“static.network.attempt_expired_time”.
To Next Page
Loading...
Need help?
General
