Yealink T40G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
362
Custom Ringtone Limit
The ring tone format must meet the following:
Phone Model
Format
Single File Size
Note
T54S/T52S/T48S/T46S/T42S/T41
S/T27G
.wav
<=8MB
2MB of space should be
reserved for the phone
T48G/T46G/T29G
.wav
<=8MB
2.4MB of space should
be reserved for the
phone)
T42G/T41P/T40P/T40G/T27P/T23
P/T23G/T21(P) E2/T19(P) E2
.wav
<=100KB
5KB of space should be
reserved for the phone
Note
The ring tone file must be in PCMU/PCMA audio format, mono channel, 8K sample rate and 16 bit
resolution.
Ringtone Configuration
The following table lists the parameters you can use to configure ringtone.
Parameter
phone_setting.ring_type
<y0000000000xx>.cfg
Description
It configures a ring tone for the IP phone.
Example:
phone_setting.ring_type = Ring1.wav
Permitted
Values
Ring1.wav, Ring2.wav, Ring3.wav, Ring4.wav, Ring5.wav, Ring6.wav, Ring7.wav,
Ring8.wav, Silent.wav, Splash.wav or custom ring tone name (for example,
Customring.wav)
Default
Ring1.wav
Web UI
Settings->Preference->Ring Type
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Sound->Ring Tones->Common
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Basic Settings->Sound->Ring Tones->Common
Parameter
account.X.ringtone.ring_type
[1]
<MAC>.cfg
Description
It configures a ring tone.

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries