Yealink T40G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
324
Default
1
Parameter
features.dnd.feature_key_sync.local_processing.enable
<y0000000000xx>.cfg
Description
It enables or disables the local DND when DND feature synchronization is enabled.
Note: It works only if s “features.feature_key_sync.enable” and
“features.dnd.feature_key_sync.enable” are set to 1 (Enabled). The value configured by
the parameter “account.X.features.dnd.feature_key_sync.local_processing.enable”
takes precedence over that configured by this parameter.
Permitted
Values
0-Disabled, DND is performed on server side only.
1-Enabled, DND is performed on both server side and locally.
Default
0
Parameter
account.X.features.dnd.feature_key_sync.local_processing.enable
[1]
<MAC>.cfg
Description
It enables or disables the local DND when DND feature synchronization is enabled.
Note: It works only if s “features.feature_key_sync.enable” and
“features.dnd.feature_key_sync.enable” are set to 1 (Enabled).
Permitted
Values
0-Disabled, DND is performed on server side only.
1-Enabled, DND is performed on both server side and locally.
Default
Blank
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for
T41P/T41S/T27P/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2.
Multiple Call Appearances
You can enable each registered line to support multiple concurrent calls. For example, you can place one
call on hold, switch to another call on the same registered line, and have both calls displayed.
You can set the maximum number of concurrent calls per line key on all-lines basis or a per-line basis. For
example, if you specify 3 concurrent-calls for account 1, you can only have three call appearances on a
corresponding line key. The additional incoming calls will be rejected.
Note
The number of concurrent calls applies to all line keys. For example, if three line keys are associated
with an account, you can have three call appearances per line key.
Topic
Multiple Call Appearances Configuration
Multiple Call Appearances Configuration
You can specify the maximum concurrent-call numbers per line key.

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries