Phone Network
25
->Network->VLAN->PC Port->Priority
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.
DHCP VLAN
Yealink IP phones support VLAN discovery via DHCP. When the VLAN discovery method is set to DHCP,
the IP phone will examine DHCP option for a valid VLAN ID. The predefined option 132 is used to supply
the VLAN ID by default. You can customize the DHCP option used to request the VLAN ID.
The following table lists the parameters you can use to configure DHCP VLAN discovery.
static.network.vlan.dhcp_enable
[1]
It enables or disables the DHCP VLAN discovery feature on the IP phone.
Network->Advanced->VLAN->DHCP VLAN->Active
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->VLAN->DHCP
VLAN->DHCP VLAN
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin)
->Network->VLAN->DHCP VLAN->DHCP VLAN
static.network.vlan.dhcp_option
[1]
It configures the DHCP option from which the IP phone will obtain the VLAN settings.
You can configure at most five DHCP options and separate them by commas.
Network->Advanced->VLAN->DHCP VLAN->Option (1-255)
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->VLAN->DHCP
VLAN->Option
T42G/T42S/T41P/T41S/T40P/T40G/T27P/T27G/T23P/T23G/T21(P) E2/T19(P) E2:
Menu->Settings->Advanced Settings (default password: admin)
->Network->VLAN->DHCP VLAN->Option
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.