Yealink T40G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
96
Default
English
Web UI
On the top right corner of the web user interface
Language Customization
You can customize the translation of the existing language on the phone user interface or web user
interface.
You can ask the distributor or Yealink FAE for language packs. You can also obtain the language packs
online: http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage.
Note
The new added language must be supported by the font library on the IP phone. If the characters in the
custom language file are not supported by the phone, the IP phone will display “?” instead.
Topics
Language for Phone Display Customization
Language for Web Display Customization
Language for Phone Display Customization
Languages available for selection depend on language packs currently loaded to the IP phone. You can
also add new languages (not included in the available language list) available for phone display by
loading language packs to the IP phone.
Topics
Customizing a Language Pack for Phone Display
Custom Language for Phone Display Configuration
Customizing a Language Pack for Phone Display
When you add a new language pack for the phone user interface, the language pack must be formatted
as “X.GUI.name.lang” (X starts from 014, “name” is replaced with the language name). If the language
name is the same as the existing one, the existing language pack will be overridden by the new uploaded
one. We recommend that the filename of the new language pack should not be the same as the existing
one.
Note
To modify translation of an existing language, do not rename the language pack.

Yealink T40G Specifications

General

SIP Accounts	3
Wall Mountable	Yes
Opus Codec	No
Display	2.3 inch 132x64-pixel graphical LCD
Network	Dual-port Gigabit Ethernet
PoE	Yes
Headset Support	Yes, RJ9 port
Power Adapter	Optional
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Local Phonebook	1000 entries