Phone Provisioning
65
Manual Provisioning
Central Provisioning
Provisioning Methods Priority
There is a priority for configuration among the provisioning methods - settings you make using a higher
priority provisioning method override settings made using a lower priority provisioning method.
The precedence order for configuration parameter changes is as follows (highest to lowest):
The provisioning priority mechanism takes effect only if “static.auto_provision.custom.protect” is set to 1.
For more information on this parameter, refer to MAC-local CFG File Configuration.
Static parameters have no priority. They take effect no matter what method (web user interface or phone
user interface or configuration files) you are using for provisioning.
Static parameters are the parameters that start with a prefix “static.”, for example, the parameters associated
with auto provisioning/network/syslog, TR069 settings and internal settings (the temporary configurations
to be used for program running).
Manual Provisioning
This method enables you to perform configuration changes on a per-phone basis.
When you manually configure a phone via web user interface or phone user interface, the changes
associated with non-static parameters you make will be stored in the MAC-local CFG file. For more
information on MAC-local CFG file, refer to MAC-local CFG File.
Topics
Web User Interface
Phone User Interface
Web User Interface
You can configure IP phones via web user interface, a web-based interface that is especially useful for
remote configuration. You can either import a configuration file to the phone or export a configuration
To Next Page
Loading...
Need help?
General
